VOCs（揮發性有機化合物）廢氣處理工藝標準通常涉及預處理、核心凈化以及后處理等環節，以確保達到環保排放標準。以下是一些常見的VOCs廢氣處理工藝標準：

　　The VOCs (volatile organic compounds) exhaust gas treatment process standards usually involve pre-treatment, core purification, and post-treatment to ensure compliance with environmental emission standards. Here are some common VOCs waste gas treatment process standards:

　　預處理系統

　　Preprocessing system

　　冷凝系統 ：針對高濃度VOCs廢氣，通過冷凝將廢氣中的部分組分轉化為液體，從而減少氣體的體積。

　　Condensation system: For high concentration VOCs exhaust gas, some components in the exhaust gas are converted into liquids through condensation, thereby reducing the volume of the gas.

　　凈化塔 ：利用填料或塔板，使廢氣與洗滌液充分接觸，吸收或中和廢氣中的污染物。

　　Purification tower: Using packing or trays to ensure full contact between exhaust gas and washing solution, absorbing or neutralizing pollutants in the exhaust gas.

　　電離捕捉器 ：用于去除油煙和粉塵等顆粒物。

　　Ionization trap: used to remove particulate matter such as oil fumes and dust.

　　干式過濾器 ：通過物理過濾去除顆粒物和某些氣體污染物。

　　Dry filter: removes particulate matter and certain gas pollutants through physical filtration.

　　核心凈化系統

　　Core purification system

　　吸附法 ：

　　Adsorption method:

　　小風量低濃度：使用活性炭或沸石作為吸附劑。

　　Low wind volume and low concentration: Use activated carbon or zeolite as adsorbents.

　　中風量低濃度：可采用活性炭吸附脫附、沸石吸附脫附或轉輪吸附。

　　Low concentration of stroke volume: Activated carbon adsorption desorption, zeolite adsorption desorption, or rotary adsorption can be used.

　　大風量低濃度：同樣可采用活性炭吸附脫附、沸石吸附脫附或轉輪吸附。

　　High air volume and low concentration: Activated carbon adsorption desorption, zeolite adsorption desorption, or rotary adsorption can also be used.

　　催化氧化法 ：

　　Catalytic oxidation method:

　　廢氣通過催化劑床層時，VOCs與氧氣發生氧化反應，轉化為CO2和H2O。

　　When the exhaust gas passes through the catalyst bed, VOCs undergo oxidation reaction with oxygen, converting into CO2 and H2O.

　　多層光催化劑和紫外燈管配置需符合特定功率要求。

　　The configuration of multi-layer photocatalysts and ultraviolet lamps must meet specific power requirements.

　　生物處理 ：

　　Biological treatment:

　　利用微生物降解VOCs為無害物質，如CO2和H2O。

　　Using microorganisms to degrade VOCs into harmless substances such as CO2 and H2O.

　　對環境條件如溫度、濕度有一定要求。

　　There are certain requirements for environmental conditions such as temperature and humidity.

　　后處理系統

　　Post processing system

　　除濕處理 ：進入活性炭吸附設施前應進行除濕處理，記錄除濕劑更換周期等信息。

　　Dehumidification treatment: Before entering the activated carbon adsorption facility, dehumidification treatment should be carried out, and information such as the replacement cycle of the desiccant should be recorded.

　　顆粒物去除 ：噴漆工藝廢氣進入活性炭處理設施前應去除顆粒物。

　　Particulate matter removal: Before entering the activated carbon treatment facility, particulate matter should be removed from the spray painting process exhaust gas.

　　設計參數

　　Design parameters

　　吸附劑裝填量與設計風量的關系：每萬立方米/小時設計風量的吸附劑裝填量應不小于1立方米。

　　The relationship between adsorbent loading amount and design air volume: The adsorbent loading amount per 10000 cubic meters per hour of design air volume should not be less than 1 cubic meter.

　　廢氣停留時間：廢氣停留時間不得低于1秒，對于某些工藝可能要求更高。

　　Exhaust gas residence time: The exhaust gas residence time shall not be less than 1 second, and may be higher for certain processes.

　　排放要求

　　Emission requirements

　　廢氣收集系統排風罩設置應符合GB/T16758的規定，吸入風速應不低于0.6米/秒。

　　The exhaust hood of the exhaust gas collection system should comply with the provisions of GB/T16758, and the suction wind speed should not be less than 0.6 meters per second.

　　以上信息結合了不同來源的規范和要求，具體實施時應參照最新的環保法規和行業標準。

　　The above information combines specifications and requirements from different sources, and specific implementation should refer to the latest environmental regulations and industry standards.

　　本文由 VOCs廢氣處理 友情奉獻.更多有關的知識請點擊 http://www.52campus.cn    真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from VOCs waste gas treatment For more related knowledge, please click http://www.52campus.cn Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.

上一篇：沸石轉輪在處理VOCs時保證其吸附效率
下一篇：涂裝流水線的工藝流程